电池内短路试验机 Battery Internal Short-Circuit Tester
一、相关标准测试要求 Test requirements
1.IEC62133-2012
二、主要技术参数 Main Technical Parameters
型号 Model |
BE-6045W |
|
温度箱参数Temperature Chamber Technical Parameters |
温度范围Temperature Range |
-10℃ ~ +80℃(可调)(Controllable) |
升温速率Temperature Rising Rate |
平均3℃/min(从-10℃升到80℃、非线性空载)Ave.3℃/min(-200℃ to 100℃、Nonlinear No-load) |
|
降温速率Temperature Cooling Rate |
平均1℃/min(从80℃降到-10℃、非线性空载)Ave.1℃/min(100℃to -20℃、Nonlinear No-load) |
|
内箱尺寸Inner Chamber Dimension |
W600 X H750 X D500 MM |
|
外箱尺寸External Chamber Dimension |
W1170 X H1850 X D1020MM |
|
内箱材质Inner Chamber Material |
镜面不锈钢板,底部补强Mirror stainless steel with bottom reinforcement |
|
外箱材质External Chamber Material |
冷轧钢烤漆处理Cold-Rolled Steel with paint-baking treatment (gray-white color) |
|
观察窗 Observation Window |
单开门上附有发热防汗3层真空大玻璃观察视窗(W430mm xH 580mm); 门框备电热(自动调节)防结霜、防凝露装置;使您在任何时候都可以通过观察窗清晰地观察箱内供试样品的试验状况The single-opening door is accompanied by a 3-layer vacuum large glass observation window (W430mm x H 580mm); The door frame is equipped with electric heating (automatic adjustment) anti-frost, anti-condensation device; so that you can clearly observe the Test status of the test sample in the box through the observation window at any time. |
|
内短路主要技术参数 Technical Parameters |
最大载荷 Max. loading |
200KG |
值解析度Resolution |
1/10000 |
|
力值精度 Force accuracy |
≤0.5% |
|
位移解析度Displacement resolution |
1/1000 |
|
位移准确度Accuracy of displacement |
≤0.5% |
|
速度范围 Speed range |
0.01-5MM/S |
|
有效行程 Effective Range |
0 ~ 200mm |
|
测试最大平面 Max. test plane |
300X300MM(特殊测试宽度亦可依客户需求定制) 300X300MM Can be customized |
|
电压采集范围 Voltage range |
0—60V |
|
电压分辨率 Voltage resolution |
5mV |
|
电压采集频率Voltage acquisition frequency |
100HZ |
|
控制系统 Control system |
伺服电机+伺服控制系统 Servo motor + servo control system
|
|
安全防护装置Safety protection device |
Explosion-proof pressure relief device, smoke exhaust device, fire extinguishing system, elect |